Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic …
These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06".…
These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter l…
These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing …
These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When us…
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A …
These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shaf…
These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". …
These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing …
These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 …
Spacer with Magnet represents a female/female standoff with total length with magnet of: 15mm and thread M3x10mm.
**Replacement:**[PRT-10927](http://www.sparkfun.com/products/10927). These are now sold in packs of ten! This page is for ref…
Spacer with Magnet represents a female/female standoff with total length with magnet of: 18mm and thread M3x10mm.
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system or motorized …
Spacer with Magnet represents a female/female standoff with total length with magnet of: 23mm and thread M3x10mm.
Spacer with Magnet represents a female/female standoff with total length with magnet of: 28mm and thread M3x10mm.
Spacer with Magnet represents a female/female standoff with total length with magnet of: 33mm and thread M3x10mm.
These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". Whe…
Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the …
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. …
There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use …
These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". Wh…
"Rubber" feet raise your PCB or project up off your desk.
**Description**: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed be…
A 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.
We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and i…
This hardware kit consists of four each of M2 style nylon hex nuts and screws.
Rubber Foot - RF-003, commonly called rubber bumpers, represents a rubber pad generally used on all forms of equipment.
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating …
These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 9…
This is an M3 Hex nut for use with M3 screws.