Alchitry Io Element Board

The Alchitry Io Element Board is the perfect way to get your feet wet with digital design. The Io features four 7-segment LEDs, five momentary push buttons, 24 basic LEDs, and 24 DIP switches that all lend themselves to fantastic beginner tutorials that will walk you through all the basics of FPGAs.

Alchitry Elements are expansion boards similar to shields for an Arduino or HATs for a Raspberry Pi but these are meant for your Au and Cu FPGA Development Boards. This Element is equipped with four connectors on the underside of the board that snap to an Au or Cu board. Be aware that the Io does not feature any connection points on the top of the board so you won't be able to stack any additional Elements on top of it.

On this most recent revision (v2) external pull up capabilities for the R12 resistor were removed

  • 4x 7-segment LED digits
  • 5x momentary push buttons
  • 24x LEDs
  • 24x DIP switches

Alchitry Io Element Board Product Help and Resources

How Does an FPGA Work?

July 30, 2020

The What, How, Why, and When of Field Programmable Gate Arrays, aka FPGAs

First FPGA Project - Getting Fancy with PWM

July 30, 2020

An initial project using Alchitry's onboard FPGA to manipulate PWM

External IO and Metastability

July 30, 2020

Why external signals can cause metastability and how to use constraint files to manage this

Programming an FPGA

July 30, 2020

Come look at the basics of working with Field Programmable Gate Arrays.

Core Skill: Programming

If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.

4 Programming

Skill Level: Experienced - You will require a firm understanding of programming, the programming toolchain, and may have to make decisions on programming software or language. You may need to decipher a proprietary or specialized communication protocol. A logic analyzer might be necessary.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Bilby Dawg / about a year ago / 1

    Is the "Alchitry Cu and Io Pulldown Resistors" problem (see forums or review for old version of this board) fixed? My attempt at understanding the rev-2 2021-10-26 schematic would suggest things are still wired to VCC

Customer Reviews

2.5 out of 5

Based on 2 ratings:

Currently viewing all customer reviews.

everything arrived well and fast, but the I/O board some leds do not work, the COM port works with archi lab, but not I can get it to work with icestudio and verilog from other sites ;

Sorry to hear you are experiencing some issues with the product. Feel free to submit a return here and we will take care of it: https://www.sparkfun.com/returns

Not good

Board is good quality, but came with 2 broken 7 segment displays. Requested a refund and support is slow to respond.

How long was the turn-around for support? Very rarely is it more than a few days...are things underway to get it remedied?