Member Since: July 1, 2011
Country: United States
I'm a born and raised San Franciscan and have been working for SparkFun Electronics in various roles since 2011.
I build models, I like to go on hikes, and relax by sitting in from of campfires.
Our new mosaic-X5 Triband GNSS RTK Breakout was released yesterday, and today we added the ESP32-C6 Qwiic Pocket Dev Board to the mix. There's a lot going on this Friday, so stop by and look!
Today, we launch our newest GNSS board featuring the mosaic-X5 in collaboration with our partners at Septentrio!
In lieu of this week's new products, we are taking a look back at our popular SparkFun Artemis Product Line.
We have so many products from our friends at Raspberry Pi and Arduino for you to check out today!
The newest Raspberry Pi is here, and we have some new accessories to go along with it!
The new SparkFun IoT Brushless Motor Driver is now available with two new Tristimulus Color Sensors equipped with an OPT4048DTSR from TI!
The SparkFun DataLogger IoT has a new, more economical version and we also have the new Tiny Code Reader from Useful Sensors!
It's a short week for us in the US, but we still have a few new products for you to check out!
This week, we announce a new VR IMU featuring the BNO086 from CEVA, a new version of the RPi Starter Kit with increased storage, a new Qwiic Mux from SparkX, and finally a brand new LTE Antenna!
The SARA-R5 LTE GNSS Module from u-blox gets its own MicroMod Function Board in this week's installment of the Friday Product Post!
We have two excellent new products to share with you this week! The SIK gets a new case and a new version and the GNSS Combo Breakout (featuring the ZED-F9P and NEO-D9S) moves from SparkX to SparkFun Red!
SparkFun's Qwiic Connect System has had a busy week being added to the new Experiential Robotics Platform, BeaglePlay, and Arduino Portenta C33!
We are so excited to finally reveal this kit to everyone who may want to pick one up! It is a comprehensive introduction to robotics that includes an easy-to-assemble hardware kit, coding environment, and online modules.
This week, we are happy to announce our newest MicroMod Processor featuring the STM32WB5MMG. We also take another look at Arduino's newest UNO R4 boards!
The RTK Reference Station was released yesterday, but we will talk a little more about it today, along with two new BMI270 6DoF IMU boards!
SparkX's new Qwiic Visible Spectrum Emitter is now available with a 10-Way Terminal & Socket.
We have two new environmental sensors that feature the SCD4x line from Sensirion as well as a wide-angle lens version of the RPi Camera Module 3 NoIR!
This week, MicroMod receives a new CAN Bus Function Board, and we now carry the Raspberry Pi Camera Module 3 NoIR!
The new LSM6DSV16X is now available in two Qwiic formats, Standard and Micro, to provide you with an AI-powered IMU set-up!
A new SparkFun-branded carrying case is now available with two new Audio Boards from WVR.
The new TMC6300 3-Phase Motor Driver is now available and ready for your next robotics project!
This week, we introduce two new Buck Regulators, a new load cell, and two new interface cables to help you with your next GNSS/GPS project!
The NINA-B306 Thing Plus is here along with two new AI single-board computers from NVIDIA!
We've assembled this annotated resource list to better understand Matter and Thread - what it is, why it matters, and use cases.
The Qwiic Dynamic NFC/RFID Tag graduates to reds and the AWS IoT ExpressLink SARA-R5 Starter Kit gets a new version.
Yesterday, we released the Thing+ Matter. Today, we take a look at it and the rest of our new products for the week!
The first easily accessible board that combines Matter and SparkFun’s Qwiic ecosystem for new IoT development is here!
Two new Air Velocity Sensor Qwiic Kits are now available! Also be sure to check out the new Raspberry Pi Debug Probe and Kitronik Servos Board, too!
Two new IN100 NanoBeacon Boards are now available with the newest versions of our Cerberus USB Cables.
A new Analog MEMs Microphone Breakout is now available as well as two new 5V Buck Regulators.
The SparkFun Blues Wireless MicroMod Starter Kit is now available, MyoWare 2.0 is back, and plenty of other new products are here this week!
Our new Qwiic-enabled Audio Codec Breakout is now available with a new version of our Hot-Air Rework Station!
Two new versions of the STTS22H Temperature sensor are now available with a new version of the updated LiPo Fuel Gauge!
A new version of the SparkFun Sensor Kit is now available and we have Raspberry Pi's newest camera modules!
We will! The chemical makeup of the battery is different from any other type of battery we've carried in the past so we want to make sure we have all documentation before listing it on our site.
Oh dang, sorry about that! It looks like it's broken on their side as well. We'll look into it, and I'll update this comment when we get a new link!
UPDATE: You should be good to go now!
Thank you so much!
Yeah, I think I'm just hitting that age where I'm realizing my age. If I recall correctly when I started at Hollywood Video (before Blockbuster) in 2005, we were beginning to phase out VHS, and then, what felt immediately after, the HD-DVD vs. Blu-Ray war began.
Hi, CyberchuckTX! This is a great question!
We have a project releasing in the blog next week that shows how we assembled one of these kits on top of SparkFun HQ. I will see about posting that information this weekend, but most people are away for the Labor Day weekend. Sorry for the delay on that!
We do provide some considerations for the enclosure for this kit in the blog, depending on whether or not you want to use a sealed or unsealed enclosure.
EDIT: This is the enclosure we used in the video and in this Monday's Post!
Hi jmst! The included SparkFun MicroMod Weather Carrier Board in the SparkFun Arduino IoT Weather Station (KIT-22636), is not equipped with a UV Sensor.
It should be good now! Thanks for looking out!
Yup! Long story short, we had to update a part, and it's being added back to stock over the weekend!
Hey, #64145!
We are still on track to ship these later this month. We'll let you know in case anything prevents us from shipping in our planned time frame. Thanks for looking out!
Hi, 134773! The original MicroMod STM32 Processor and the ESP32 Processor actually have the same 16MB Winbond memory IC that's on the STM32WB5MMG Processor. Hopefully, this helps!
Absolutely! These should be updated now.
With the release of the Jetson Nano Developer Kit, NVIDIA...
If you're new to electronics and programming, the RedBoard...
This box of tools is a happy medium between the beginner and...
This assortment of tools is great for those of you who are...
The SparkFun Inventor's Kit for IOIO (SIKIO) provides 7...
The SparkFun Inventor's Kit (SIK) is a great way to get...
This is Sylvia’s Super Awesome Arduino Kit, a companion kit...
The Hack Pack Workshop Supply Kit is a great way to get your...
This is the SparkFun LED Starter Kit, an ultimate assortment...
The SparkFun Inventor’s Kit for RedBot is a great way to get...
Welcome the RedBot Basic Kit, a robotic development platform...
The SparkFun Mini Inventor's Kit (SMIK) is a great way to...