Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The Click communicates with the target MCU through the UART interface and runs on a 3.3V power supply.
It’s a compact and easy solution for adding 4-to-20mA industry standard communication protocol to your design.
MIKROE 4-20mA R Click is an add-on board in mikroBUS™ form factor which serves as a receiver in a 4-20mA current loop stand…
Opto 3 Click is a relay Click board™, equipped with two pairs of optically isolated solid-state relays (SSR).
Shuttle Click in combination with mikroBUS Shuttle provides an easy and elegant solution for stacking multiple Click boards…
DAC 8 Click is a compact add-on board that contains a fully-featured, general-purpose voltage-output digital-to-analog conver…
Arduino Mega Click Shield is an extension for Arduino Mega and any other boards that share its pinout.
MCP2517FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
This adapter supports the mikroBUS™ Click socket with a MatesBUS interface to connect products of any TIMI model directly t…
AN to PWM 2 Click is based on the LTC6992CS6, a voltage-controlled PWM generator from Analog Devices.
USB UART 2 Click provides USB isolation and carries the ADUM4160BRWZ USB port isolator.
Secure 2 Click carries the ATAES132A, a cryptographic coprocessor with secure hardware-based key storage from Microchip.
Atmel's ATmega328P 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of progra…
MCP2003B Click is a mikroBUS™ add-on board with a bi-directional LIN transceiver.
MCP25625 Click is a mikroBUS™ add-on board carrying a Microchip CAN controller with an integrated transceiver.
RS485 4 Click offers an UART to RS485 signal conversion, featuring the ADM2795E specialized IC with the complete galvanic iso…
RS232 3 Click is a compact add-on board representing a universal usable RS232 transceiver.
RS485 3 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…
ADC3 Click carries Microchip’s MCP3428 16-bit multichannel analog-to-digital converter.
DAC3 Click carries Microchip’s MCP4726 IC, a 12-bit digital-to-analog converter, along with voltage output screw terminals.
EEPROM 3 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes.
DAC 2 Click carries LTC2601, a 16-bit digital-to-analog converter from Analog Devices, along with voltage output screw termin…
Expand 4 Click carries TPCIC6A595, a chip that combines an 8-bit serial-in, parallel-out shift register with an 8-bit D-type …
EEPROM2 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable and Programmable Read Only Memory, organized in bytes…
Comparator Click, carrying the LM2903 IC, has two independent precision voltage comparators.
ADC 2 Click carries MCP3551, which is a 22-bit ADC with automatic internal offset and gain calibration.
The mikroBUS Cape is an extension for BeagleBone Black, the popular low-cost development platform running Linux.
A universal programmer and debugger for ARM® Cortex®-M, RISC-V, PIC®, dsPIC, PIC32, and AVR over USB-C.
The Dual LIN Click is a Click board™ based on the TLE7268SKXUMA1, a Dual LIN transceiver from Infineon.
Secure 4 Click includes the ATECC608A, a secure CryptoAuthentication™ device from Microchip.
V to HZ Click is a device that converts an analog voltage input signal into a pulse wave signal of a certain frequency.
10-pin 0.10" ARM Cortex Debug for the UNI CODEGRIP.
DAC 7 Click carries the AD5624R, a low-power four-channel, 12-bit buffered Digital-to-Analog Converter.
The next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at…
I2C 1-Wire Click carries DS2482-800, a “bridge device” that performs bidirectional conversions between I2C controller and…
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough …
Pi Click Shield is an extension for Raspberry Pi®, the low-cost mini-computer.
Secure UDFN Click is universal, socket based click board, specifically designed for the Microchip CryptoAuthentication™ de…
10-pin 0.05" pitch ARM Cortex Debug adapter with flat cable included for UNI CODEGRIP.
Expand 3 Click carries DS2408, an 8-channel programmable I/O expander.
The Otto DIY Maker is the perfect STEM+A robot kit for parenting or school education and includes what you need to run a STEM…
USB to I2C Click is an adapter add-on board with a general-purpose USB master to I2C/UART serial interface.
CAN FD 6 Click as its foundation uses the TCAN4550, a CAN transceiver that supports CAN and CAN FD protocols.
ADAC 3 Click is a compact add-on board representing the ADC/DAC combo solution.
Smoke Chamber is an addition designed by Analog Devices for use alongside smoke and aerosol detection sensors.
ADC 19 Click is a compact add-on board that contains a high-performance data converter.
Click Analyzer is a smart and powerful tool for analyzing pin states and voltage levels on the mikroBUS™.