Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on …
This is a stereo amplifier kit designed to make use of the [STA540](http://www.sparkfun.com/commerce/product_info.php?product…
This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The …
Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Spark…
Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the sup…
The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many oth…
This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and lon…
This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than our FM Tuner Evaluation B…
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands f…
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detec…
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill …
This small breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of …
The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well suppo…
This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio sta…
The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities.
The MP3 Trigger board is built to make MP3 sound integration easier than ever.
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detec…
The Noisy Cricket Stereo Amplifier, uses the LM4853 which can be configured to output up to 1.5W of power in mono operation o…
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S audio to an an…
The SparkFun TSH82 Configurable OpAmp Board gives you two gain stages, each individually accessible on the header pins. Confi…
The SparkFun Edge Development Board powered by TensorFlow is perfect begin using voice recognition without relying on the ser…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module.
The MicroMod Machine Learning Carrier combines the freedom to explore any processor in the MicroMod lineup without the need f…
The IQaudIO Pi-DigiAMP+ is the First HAT compliant Full-HD (192/24) HiFi quality DAC & up to 2x35w Class D amplifier for the …
The IQaudIO Pi-DAC+ HAT Audio card for the Raspberry Pi delivers outstanding sonic performance and full-HD (24/192) audio cap…
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the InvenSense ICS-40180 analog microphone.
Based on a new generation ARM Cortex M7, the Qwiic Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompresse…
Powered by Raspberry Pi's RP2040 microcontroller, this board has the power to run all Tensorflow Lite Micro tiny machine lear…
MIKROE AudioAmp Click is a mikroBUS™ add-on board that functions as a mono audio amplifier.
MIKROE StereoAmp Click functions as a stereo amplifier and is ideal for battery operated devices or as a lab amplifier.
MIKROE Mic Click carries the SPQ0410HR5H-B surface mount silicon microphone with maximum RF protection.
Noise Click is a mikroBUS™ add-on board with noise detecting circuitry.
MIKROE BUZZ Click is an accessory board in mikroBus™ form factor.
Text To Speech Click is a mikroBUS™ add-on board that carries an Epson S1V30120 speech synthesis IC.
MIKROE Speaker Click is a compact add-on board that contains an audio power amplifier with a high-quality audio reproduction.
MIKROE Rec&Play Click is a digital voice recorder on a Click board™.
The MIKROE SpeakUp Click is a speech recognition Click board™.
MIKROE FM Click with it’s Si4703 IC is a complete FM radio tuner in the form of add-on board.
MIKROE AM/FM Click is a RADIO RECEIVER Click board™ that can be used to listen to music from the AM and FM radio bands.
MIKROE MP3 Click is an accessory board in mikroBus™ form factor.
MIKROE Volume Click is a compact add-on board that provides the user with complete digital volume control.
The SparkFun Qwiic MP3 Trigger takes care of all the necessary requirements for playing sound files, all you need to do is se…
MIKROE Headphone AMP Click is a compact add-on board that contains a stereo headphone amplifier.
Volume 2 Click is a compact add-on board that provides the user with complete digital volume control.
DSP Click is a compact add-on board that contains a multi-effects digital signal processor.
Buzz 3 Click is a compact add-on board that contains a sounder driver that produces higher volume with a lower current.
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles.
