Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
7x10 G Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
LED driver Click carries the MCP1662 high-voltage step-up voltage driver from Microchip.
LED Flash Click functions as a high power LED flash, and carries the CAT3224 flash LED driver.
MCP1664 Click contains 4 high-power white LEDs.
MCP73213 Click carries the MCP73213 dual-cell Li-Ion/Li-Polymer battery charge management controller with input overvoltage p…
16x9 Click is an array of 144 LEDs, driven by a single IC with relatively low pin count (28).
BIG 7-SEG R Click is what you need if you want to add a seven-segment LED display to your project.
Signal Relay Click can be used for ON/OFF control in various devices.
2x2 Key Click has a 4 button keypad.
FLICKER Click can control loads up to 5A, 250 VAC/30 VDC at a predefined time interval.
Rotary Click carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 orange LEDs.
Flash 3 Click is a mikroBUS™ add-on board for adding more Flash Memory to your target board microcontroller.
Thumbwheel Click is a mikroBUS™ add-on board with a 10-position rotary sprocket connected to a 1-Wire 8-Channel Addressable…
Matrix G Click is a mikroBUS™ add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
Matrix R Click is a mikroBUS™ add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
Matrix RGB Click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED…
DIGI POT 2 Click is a mikroBUS™ add-on board with a single channel digital potentiometer TPL0501 with 256 wiper positions.
Timer Click is a mikroBUS™ add-on board with Analog’s DS1682 total elapsed time recorder.
LED Ring R Click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-ou…
Flash 2 Click features a 64 Mbit Flash memory IC, manufactured by using the proprietary high-performance CMOS Super-Flash® t…
RTC6 Click carries Microchip’s MCP79410 Real-Time Clock/Calendar IC with built-in 64 bytes of battery-backed SRAM an additi…
EEPROM 3 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes.
Button G Click is the simplest solution for adding a single pushbutton to your design.
7x10 R Click is a LED dot matrix display Click, which can be used to display graphics or letters in a very simple and easy wa…
RTC 5 Click carries MCP79510, a real-time clock/calendar with an SPI interface (mikroBUS™ MISO, MOSI, SCK and CS pins).
EEPROM2 Click provides 2 Mbit (2,097,152 bits) of Electrically Erasable and Programmable Read Only Memory, organized in bytes…
Relay 2 Click is a dual relay Click board™, equipped with two single-pole solid state relays (SSR), built with the patented…
Button R Click is the simplest solution for adding a single pushbutton to your design.
Rotary Click carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 yellow LEDs.
RTC4 Click carries DS2417, a real time clock/calendar with a 1-Wire MicroLAN interface and a programmable interrupt for syste…
Rotary R Click carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 red LEDs.
IR Reflect Click carries a GP2S700HCP reflective photointerrupter and an onboard potentiometer.
4x4 RGB Click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen.
High speed network communications are realized through an 80 MHz SPI interface.
Rotary B Click carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 blue LEDs.
AlphaNum Click is a simple solution for adding 14-segment alphanumeric display to your device.
AlphaNum G Click is a simple solution for adding 14-segment alphanumeric display to your device.
RTC 3 Click carries BQ32000, a real time clock with an integrated trickle charge circuit.
Rotary G Click carries a 15-pulse incremental rotary encoder with detents, surrounded by a ring of 16 green LEDs.
OLED C Click is equipped with the 96x96 high-color OLED display.
OLED W Click carries a 96 x 39px white monochrome passive matrix OLED display.
BarGraph Click is a 10-segment bar graph display Click, which uses a high-quality bar graph LED display.
8x8 B Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
8x8 G Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
8x8 Y Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
ETH Click is an accessory board in mikroBus™ form factor.
BATT-MAN 2 Click is a compact add-on board representing an advanced battery and power management solution.
Current Limit 6 Click is a compact add-on board representing a current-limiting solution.
