Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how val…
The Qwiic MultiStar adds five additional ports to boards that have only one Qwiic port on the I2C bus and can also be added t…
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. T…
USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to moun…
This is an Audio to Alligator Cable, an 8" long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the …
This is a 3-pin male PTH right angle header.
USB Type 'Mini-B' Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/d…
This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awh…
Sometimes referred to as "spade connectors," these quick disconnects are really useful as power connectors in prototyping or …
This is a 5mm PTH fuse clip intended to be used with our Glass Fuses. **Note: **These are sold in single units. If you inten…
This is a simple 14-pin female PTH header. Each pin has a spacing of 0.1" in between each other.
This is a SMD 4-pin right angle male header. We use this header on our [Graphic LCD Serial Backpack](https://www.sparkfun.com…
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work.
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers sold…
Ever wanted to see what's on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standar…
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC.
These are standard 0.1" spaced header pins that can be through-hole mounted.
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 5-pin m…
SD cards are all over the place and they're great for storing large amounts of data. Why not take advantage by adding an SD s…
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/g…
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character…
These are simple 12-position screw terminals with 3.5mm pitch pins.
This is a SMD 6 pin right angle male header. We use this header on our [LilyPad Main Board](http://www.sparkfun.com/commerce/…
This is a simple 2x6 female PTH header. Each pin has a spacing of 0.1" in between each other.
High speed network communications are realized through an 80 MHz SPI interface.
This is a 3-pin male SMD right angle header.
ETH Click is an accessory board in mikroBus™ form factor.
Type C connector that converts the USB-C 2.0 micro head data into the ordinary USB 2.0 data.
MIKROE Binho Nova Click is an adapter Click board™ that can be used as a multi-protocol adapter.
Here is a four pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are …
EtherCAT Click as its foundation uses the LAN9252, a 2-port EtherCAT device controller with dual integrated Ethernet PHYs fro…
This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something!
The Monarch Adapter Click is used to connect a compatible Monarch Go LTE-M modems from Sequans to your development board or p…
These 0.1" spaced female headers are perfect for building your own Raspberry Pi B add-on modules. These PTH headers are arran…
This type C connector supports reversible plug orientation as well as the cable direction.
This board can be used as an I2C Adapter with no main component on itself, with only an on-board connector for connection est…
MIKROE ETH 3 Click is a compact add-on board that contains Ethernet Controller & PHY for embedded applications.