Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boar…
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic enabled board.
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, B…
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
The Kingston Canvas Go! Plus 64GB MicroSD Card is a top-of-the-line memory card perfect for popular single board computers su…
The Edimax 2-in-1 WiFi and Bluetooth 4.0 Adapter (EW-7611ULB) is a nano-sized USB Wi-Fi adapter with Bluetooth 4.0 that suppo…
This adapter has a standard polarity Male SMA connection at both ends.
The Edimax 2-in-1 Wi-Fi 4 & Bluetooth® 4.2 Adapter is a nano-sized USB Wi-Fi adapter that supports Wi-Fi up to 150Mbps.
It's tiny, it's handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter y…
The FLIR® Lepton® Adapter Module allows your OpenMV Camera to interface with the FLIR Lepton 1/2/3 Thermal Imaging sensors …
The SparkFun Jetson Nano Basic Kit with Battery Pack provides you with all of the essential parts needed to start new project…
This Adapter allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Ty…
The SparkFun 16-Pin SSOP to DIP Adapter is a small PCB that lets you adapt SSOP packages into a DIP footprint. These small bo…
This is a low-cost, basic SOIC breakout boards. This custom PCB will interface a standard SOIC package IC to 0.1" headers, wh…
Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" header…
SparkFun Jetson Nano Intermediate Kit with Power Supply provides you with all of the essential parts needed to start new proj…
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and…
8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with…
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless bo…
This is a USB Type-C Power Supply that is compatible with the Raspberry Pi 4.
SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new proj…
The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less sp…
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
The QC3.0 Power Supply Set (US) is a USB wall adapter with an input value of AC100-240V, and an output of 6V-6.5V/3A, 6.5V-9V…
The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96.
This MIKROE 50-100mil Adapter allows you to connect a mikroProg for STM32 programmer and hardware debugger to a Cortex debug …
MIKROE Turbidity Click is an adapter Click board™, used to interface a compatible turbidity sensor with the host MCU.
MIKROE Binho Nova Click is an adapter Click board™ that can be used as a multi-protocol adapter.
This board can be used as an I2C Adapter with no main component on itself, with only an on-board connector for connection est…
Adapter Click is a breakout board which simplifies connection of add-on boards with IDC10 headers to mikroBUS™ socket.
EVE Click is a display controller board in mikroBUS™ form factor.
Terminal 2 Click is an adapter Click board™ used as a mikroBUS™ socket expansion board.
Type C connector that converts the USB-C 2.0 micro head data into the ordinary USB 2.0 data.
TFmini Click is an adapter Click board™ used to interface a compatible ToF (Time of Flight) LiDAR sensor with the host MCU.
H-Bridge MOSFET board represents a small-sized adapter board that allows you to connect all brushed DC motors (BDC) to a H-Br…
The Monarch Adapter Click is used to connect a compatible Monarch Go LTE-M modems from Sequans to your development board or p…
Riverdi Click is an adapter for connecting Riverdi TFT displays to a mikroBUS socket.
Skywire™ Click is an adapter Click, which hosts NimbeLink/Skywire™ cellular modems (using stacking headers) to MikroElekt…
This adapter supports the mikroBUS™ Click socket with a MatesBUS interface to connect products of any TIMI model directly t…
This type C connector supports reversible plug orientation as well as the cable direction.
The adapter consists of one ZIF connector ZIF1004UH with four pins of 1.0mm pitch, and two 2.54mm pitch screw terminals on op…
The micro:bit Click adapter is equipped with two proprietary mikroBUS™ sockets, allowing all the Click board™ devices to …
XPRO-Adapter Click is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS™ bas…
mikroBUS Shuttle is a small add-on board, which is intended to be used with Shuttle Click, in order to expand the mikroBUS™…
PS/2 Click is a cost-effective solution for adding keyboard and mouse connectivity to your design.
