Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The RTK Express Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The SparkFun GPS-RTK-SMA Kit comes with just what you need to get started using GPS Real Time Kinematics and the u-blox ZED-F…
The RTK Surveyor Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The RTK Express Plus Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, EMG sensor kit that provides you with every board f…
To make it even easier to get started, we've assembled this Qwiic Cable Kit with a variety of Qwiic cables from 50mm to 500mm…
This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port.
The SparkFun GPS-RTK Dead Reckoning Kit gives you just what you need to get started with GPS Real Time Kinematics and the u-b…
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of solid core wire in a cardboard dispe…
1 Meter USB Type C to Type C cable USB 2.0 data transfer capabilities.
This is an simple 3' long Micro-HDMI to HDMI cable. Nothing fancy, it just works!
This polarized I2C cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly i…
The SparkFun GNSS-RTK Accessory Kit gives you just what you need to start using your RTK board for your project.
This is a time saving kit of 140 jumper wires - cut, stripped, and pre-bent for your prototyping pleasure.
This is a 150mm long, 10-conductor cable that's especially ideal for many JTAG applications.
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB…
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the …
These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispens…
The SparkFun 4-in-1 Multi-USB Cable is a four-headed cable that will ensure that you're never stuck looking for a USB cable t…
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
These 0.3m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the…
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup…
This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes th…
This is a SparkFun exclusive! These are 12" long, 26 AWG jumper wires terminated as male to female. Use these to jumper from …
This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alliga…
ESP-Prog is one of Espressif’s development and debugging tools.
This is a time saving large kit of 700 jumper wires - cut, stripped, and pre-bent for your prototyping pleasure.
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together …
This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to con…
Magnet wire is super useful stuff, and when you need it there's nothing else that will work. Whether you're winding a transfo…
These 2m cables have minor, yet genius modifications that allow both ends (the A & Micro-B) to be plugged into their ports re…
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 3, 2, and B+ so you can easily connect to the low-level…
Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have…
This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port.
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables …
This is a 5 pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors.
These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. This is a pack …