Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
Turning off backorders - supply of main IC is delayed until July 2022.
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint.
The SparkFun Beginner Parts Kit is a small container of frequently used parts that gives you all of the basic components you…
The SparkFun Qwiic micro:bit Breakout with Headers is a board that connects to the BBC micro:bit and expands the capabilities…
These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect h…
A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction w…
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detec…
This 2x20 "tall" header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to…
A kit that includes all the male headers needed for your Raspberry Pi Pico board.
The SparkFun WM8960 Audio Codec Breakout with Headers is a low-power, high-quality stereo codec with 1W Stereo speaker driver…
This set of female stackable headers includes two 15-pin headers; the pins are spaced by 0.1".
The SparkFun Qwiic Shield for Thing Plus makes it so you can use SparkFun's Qwiic connect ecosystem with development boards t…
The SparkFun ESP8266 Thing Dev Board with Headers is a dev board that has been designed around the ESP8266, with an integrate…
The SparkFun Qwiic Wireless Speaker Kit provides you with everything you need to make a wireless audio speaker.
These headers are made to work with the SparkFun ESP32 Thing to connect to ESP32 Shield boards.
This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the [MyoWare …
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards.
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications.
These stackable headers are made to work with the [SparkFun ESP32 Thing Plus](https://www.sparkfun.com/products/14689) to con…
These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards.
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
Each kit of headers makes your Teensy 4.0, 3.2, and LC breadboard compatible and will allow for stacking a Teensy and Teensy-…
The SparkFun Qwiic Shield for Arduino Nano makes it so you can use SparkFun's Qwiic connect ecosystem with development boards…
The LCD Shield gives your OpenMV Camera the ability to display what it sees on-the-go while not connected to your computer.
This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common config…
This shield provides an easy way to SparkFun's Qwiic ecosystem with your Teensy 4.1, 3.6, or 3.5 board footprint.
These standard female headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a gre…
This shield provides an easy way to SparkFun's Qwiic ecosystem with your Teensy 4.0, 3.2, or LC board footprint.
This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.
The WiFi Shield gives your OpenMV Cam the ability to connect to the Internet wirelessly and is perfect for streaming video fr…
This is a super small, 2x5 pin female PTH header. This header is in the common configuration for JTAG applications.
This is a 2x5 pin 1.27mm header.
This is a 12-pin male PTH straight header.
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smôl**, a new range of boards which a…
These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards.
These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great dea…
This is a 3-pin male PTH right angle header.
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. T…
This is a simple 14-pin female PTH header. Each pin has a spacing of 0.1" in between each other.
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work.
These are standard 0.1" spaced header pins that can be through-hole mounted.
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/g…
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 5-pin m…
This is a 3-pin male SMD right angle header.
