Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The AWS IoT ExpressLink SARA-R5 Starter Kit provides all you need to connect a device to AWS IoT Core over a cellular LTE-M n…
This is a 1024 x 600 resolution IPS display touchscreen for the Raspberry Pi.
The Raspberry Pi Global Shutter Camera is a specialized 1.6-megapixel camera from Raspberry Pi that is able to capture rapid…
Does your Arduino need to control a high voltage item, like a 12V LED strip, while needing to be powered as well? Do you want…
This Adapter allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Ty…
The SparkFun USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/h…
Nicla Voice allows for easy implementation of always-on speech recognition on the edge.
The Kitronik Inventor's Kit for the Raspberry Pi Pico offers the perfect introduction to physical computing with the Pico.
The SparkFun Thing Plus Matter is the first easily accessible board that combines Matter and SparkFun’s Qwiic ecosystem for…
This is the 8mm M-12 mount standard lens for use with the Raspberry Pi HQ Camera Module M-12.
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1005 Air Velocity S…
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1015 Air Velocity S…
The compact Simply Servo board for Raspberry Pi Pico allows for up to 8 servos to be controlled simultaneously.
The Raspberry Pi Debug Probe is an inexpensive, all-in-one USB to serial debug and UART bridge.
The SparkFun IN100 NanoBeacon Lite Board offers a 2.4 GHz wireless low energy BT beacon breakout with exceptional low power c…
The SparkFun IN100 NanoBeacon Board offers a 2.4 GHz wireless low energy BT beacon breakout with exceptionally low-power cons…
The SparkFun 4-in-1 Multi-USB Cable is a four-headed cable that will ensure that you're never stuck looking for a USB cable t…
This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12.
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the Vesper VM2020 analog microphone.
The SparkFun BabyBuck Regulator Breakout - 5V features the AP63357, a 3.5A synchronous buck converter with a wide input volta…
The SparkFun Buck Regulator Breakout - 5V features the AP63357, a 3.5A synchronous buck converter with a wide input voltage r…
This 2.5W, 4 Ohm speaker is only 28mm in diameter and just over 4mm thick.
The SparkFun Blues Wireless MicroMod Starter Kit provides every part needed to get you connected and start prototyping with t…
Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes.
A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi.
This black version of the Day of the Geek soldering kit you will be able to learn the basics of soldering by being able to as…
This white version of the Day of the Geek soldering kit you will be able to learn the basics of soldering by being able to as…
This is a handy selection of popular LED's in a handy carrying case.
The MyoWare® 2.0 Muscle Sensor Basic Kit is an Arduino-compatible, EMG sensor kit that provides you with the essential board…
The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, EMG sensor kit that provides you with every board f…
The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and…
This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air fl…
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature rang…
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF los…
With everything included in this Sensor Kit, you'll be able to sense gesture, humidity, temperature, motion, touch, sound, al…
The MyoWare® 2.0 Muscle Sensor is an Arduino-powered, all-in-one electromyography (EMG) sensor from Advancer Technologies an…
The Raspberry Pi High Quality Camera M12 Mount is the same high quality camera as the previous model but with an M-12 lens mo…
The Raspberry Pi Camera Module 3 is the latest entry in our mainstream camera line-up, and the successor to the popular Came…
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough …
The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NB…
The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with a single …
The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with up to two…
A first for the Raspberry Pi ecosystem: A 64MP camera module that matches the specs of smartphone cameras.
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables …
Arduino Nano 33 BLE Sense is built around the NINA B306 module for BLE and Bluetooth 5 communication.
