Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other.
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc.
These Adam Tech Wall Adapter Cables are terminated with a standard European (CEE 7/7) plug at one end and three insulated spa…
These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
This is a foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the …
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opp…
This is a 150mm long, 10-conductor cable that's especially ideal for many JTAG applications.
To make it even easier to get started, we've assembled this Qwiic Cable Kit with a variety of Qwiic cables from 50mm to 500mm…
These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to…
This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micr…
This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins.
This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.
This is a SparkFun exclusive! These are 155mm long, 26 AWG jumpers with male connectors on both ends. Use these to jumper fro…
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.
This is an Audio to Alligator Cable, an 8" long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the …
This is a 5 pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors.
A 200mm MIPI Cable for interfacing the Raspberry Pi Display Modules with the Raspberry Pi 5.
A 200mm MIPI Cable for interfacing the Raspberry Pi Camera Modules with the Raspberry Pi 5.
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE c…
This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. *** _**smô…
This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards side by side. This FPC has an …
Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in…
USB-C to USB-C with real-time display charging power, all in a 6.5ft cable!
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE …
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High q…
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
12" long cables terminated with banana plugs, ideal for the micro:bit and gator:bit ecosystems.
Do you fear that your power may not be "far reaching" enough? How would another 3' work for you? Okay, so it doesn't sound ve…
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the t…
These are six inch long, 26 AWG jumper wires with breadboard-friendly male connectors on both ends.
This is a basic SMA male to female connector cable at 25cm in length and RG174 housing.
This is a SparkFun exclusive! These are 155mm long, 26 AWG jumper wires. Multiple jumpers can be installed next to one anothe…
This is a SparkFun exclusive! These are 12" long, 26 AWG jumper wires terminated as male to female. Use these to jumper from …
This is a basic SMA male to female connector cable at 1M in length and RG174 housing.
This is a basic RP-SMA male to female connector cable at 1M in length and RG174 housing.
This is a USB 3.0 type A to Micro-B 9-pin cable.
This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing.
This is an interface cable for the [Bus Pirate](http://www.sparkfun.com/commerce/product_info.php?products_id=9544), designed…
These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board.…
These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are cap…
This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing.
The cable features a 1.25mm pitch GHR-06V-S & GHR-04V-S 'locking' JST connector commonly found on some sensors, radios, and o…
A simple 10-pin cable.
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with th…
Pi Zero Micro USB to USB A is a really useful USB specification! It allows some small devices that would normally be unable t…
