Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a 16mm thumb joystick.
Although small in size, this roller microswitch is rated for controlling electrical loads ranging from logic level to power d…
This IR proximity contactless button makes for a good replacement for typical push buttons
Rotary Magnetic Holder represents a solution designed for use alongside magnetic rotary position sensors.
Button Y Click is a Click board™ equipped with the tactile switch, sometimes referred to as a pushbutton.
iButton Click - is an iButton™ probe Click board™.
Tamper 2 Click contains a levered D2HW-A221D switch by Omron, which outputs signal in both positions - pressed and released.
Keylock Click carries a processed sealed key lock mechanism that can be set in three different positions.
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
Tamper Click is equipped with SDS001, a low profile side-actuated detect switch, made by C&K company.
This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in tha…
A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep…
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for …
Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to…
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, pa…
These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount i…
This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spa…
Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power swi…
These are the sturdy little stomp switches that you find on guitar effects pedals. They’re 3PDT (three-pole, double-throw) …
This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rock…
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects!
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole.
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5…
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ r…
This Translucent Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but…
This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our ot…
It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up w…
This is a 3-terminal microswitch two pack, each equipped with a 20mm offset lever actuator. These switches have a great 'clic…
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. **Note:** Po…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these b…
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the us…
Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
This Translucent MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used …
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at [monome.org](http://monome.…
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of mult…
This is a mountable SPDT slide switch --- great for use as a general control switch. The pins are spaced by 3.7mm (0.14"), ma…
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ r…
This Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used…
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or…
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up gre…
We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a per…
This is a simple knob that connects to the small and medium sized linear slide potentiometers.
Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocke…
This is a joystick thumb pad very similar to the thumb pads on PlayStation controllers.
