Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), …
Brushless 6 Click is designed to drive a three-phase sensorless, brushless motor, also known as the BLDC motor.
These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism usin…
MIKROE Brushless 14 Click is a compact add-on board suitable for controlling BLDC motors with any MCU.
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic …
DC Motor 15 Click is a compact add-on board that contains a motor driver with current sense and regulation.
Silent Step 3 Click uses the TMC2660, a highly integrated bipolar step motor power driver, from the Trinamic company.
H-Bridge 3 Click can be used to drive a H-Bridge motor by changing output states.
Multi Stepper Click is a compact add-on board that contains a bipolar stepper motor driver.
DC Motor 8 Click is a DC motor driver.
Your computer science department in a box! From beginner's coding to advanced AI, bring CS learning to life.
Brushless 8 Click is a compact add-on board suitable for controlling BLDC motors with any MCU.
These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06".…
These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter l…
These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing …
These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When us…
H-Bridge Driver 2 Click is a compact add-on board that contains an H-bridge gate driver, also known as a full-bridge pre-driv…
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A …
These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shaf…
These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". …
MIKROE DC Motor 21 Click is a compact add-on board that contains a brushed DC motor driver.
These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing …
MIKROE H-Bridge 9 Click is a compact add-on board that contains six MOSFET half-bridge outputs.
Brushless 9 Click is a compact add-on board suitable for controlling BLDC motors with any MCU.
These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 …
DC Motor 17 Click is a compact add-on board that contains a brushed DC motor driver.
Brushless 12 Click is a compact add-on board suitable for controlling BLDC motors with any MCU.
DC Motor 11 Click is a brushed DC motor driver with the current limiting and current sensing.
If you need to control DC motors with loads up to 10A, PWM Driver Click is the perfect solution, thanks to the Silicon Lab Si…
The Qwiic Haptic Motor Driver Kit includes a small LRA vibration motor, wires, and the breakout board for Dialog Semi's DA728…
This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V.
DC MOTOR 5 Click carries the DRV8701 brushed DC motor gate driver from Texas Instruments.
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12…
Stepper 10 Click is a two-phase bipolar stepping motor driver capable of controlling one stepper motor with PWM constant curr…
Stepper 18 Click is a compact add-on board that contains a microstepping stepper motor driver.
DC MOTOR 4 Click is capable of driving motors with a supply voltage from 4.5V to 36V.
MIKROE Stepper 17 Click is a compact add-on board that contains a bipolar stepper motor driver.
This is the Micro Gripper Kit B, a simple robotics kit that is great for "getting a grip" on smaller robotics projects! Desig…
Spacer with Magnet represents a female/female standoff with total length with magnet of: 15mm and thread M3x10mm.
This is a breakout board for the [L298N](http://www.sparkfun.com/commerce/product_info.php?products_id=9479) full-bridge dual…